Tripp Lite's SMART 1000RM2U intelligent, line-interactive sine wave rack/tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requires only two rack spaces (2U) in a standard rack enclosure. Large internal batteries offer 17 minutes half load runtime and 7 minutes at full load. Maintains regulated 120V nominal output without using battery power during brownouts and overvoltages from 83 to 147V. 1000VA/700 watt power handling capability and full time sine wave output supports networking, telecom and other sensitive electronic applications. Includes a total of 6 outlets arranged in 2 load banks that are individually controllable via software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment.
Plug/Connector Type:
NEMA 5-15P
Receptacles:
6 x NEMA 5-15R
Load Capacity:
1 kVA/700 W
Input Voltage:
110 V AC
Input Voltage Range:
120 V AC Single-phase
Output Voltage:
120 V AC Single-phase
Frequency:
60 Hz
Waveform Type:
Sine Wave
Filtering:
EMI / RFI
Network Management:
SNMP Manageable Optional
Overload Protection:
15A input breaker
Alarm:
Low Battery
Emergency Power OFF:
Yes
Status Indicators:
5 front panel LEDs - Green POWER LED, 3 color BATTERY CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED.
Interfaces/Ports:
1 x DB-9
Modular Slots:
1 x Communications Slot
Batteries:
Sealed Lead Acid User Replaceable Hot-swappable
Backup/Run Time:
0.35 Hour 500 W Half Load
Battery Life:
26297.44 Hour to 52594.88 Hour
Battery Recharge Time:
4 Hour Minimum
Package Contents:
SmartPro 1000RM2U UPSSMART 1000RM2U UPS SystemMounting hardware for 4 post rackmount installationCabling for USB & DB9 monitoring and EPO switchingPowerAlert unattended shutdown and UPS/Power monitoring softwareWarranty information
Additional Information:
SMART1000RM2U line interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network grade AC surge suppression 1000VA / 700 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices Supports 2U rackmount installation in 4 post rack enclosures with included mounting accessories, 2 post rackmount mountable with optional 2POSTRMKIT accessory, upright tower installation supported with optional 2-9USTAND accessory Large internal batteries offer runtimes of 21 minutes at half load (500VA / 350 watts) and 9 minutes at full load (1000VA / 700 watts) Maintains regulated 120V nominal output during brownouts and overvoltages from 83 to 147V Includes 6 UPS-supported outlets arranged in 2 individually controllable load banks (2 outlets per bank) that can be powered off and back on again via software interface PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise management software is also available for select opportunies Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected devices Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW) Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter Emergency Power Off (EPO) interface with cable Multi-function audible alarms and set of 5 front panel LEDs Network-grade AC surge suppression Attractive all-black color scheme UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary Two year warranty with $250,000 connected equipment insurance (USA & Canada only)
System Requirements:
TYPICAL APPLICATIONS: Ideal for rackmount or upright tower protection of fileservers, network accessories and telecommunications equipment in server rooms, internetworking closets, co-location racks, kiosks and a variety of other locations. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems.
Certifications & Standards:
UL1778 (USA), cUL (Canada), FCC Class B (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications
Circuit Testers
Connector Cables
Mounting Kits
PDUs
Power Management Adapters
Power Strips
Surge Suppressors
Temperature & Humidity Sensors
Add items to your shopping cart
Price: $450.99
Price: $2123.99
Price: $6353.99
Price: $4338.99
Price: $1290.99
Price: $99.99
