Manufacturer

Supermicro Computer, Inc

Manufacturer Website Address

www.supermicro.com

Product Name

X7DCL-3 Server Board

Product Type

Server Board

Front Panel Interfaces

1 x COM2

Number of SATA Interfaces

6

Form Factor

ATX

Number of Memory Slots

6

Memory Technology

DDR2 SDRAM

Chipset Manufacturer

Intel

Total Processor Support

2

Processor Socket

Socket J

Floppy Controller

Yes

SAS Controller

Yes

Gigabit Ethernet

Yes

Manufacturer Part Number

X7DCL-3

Brand Name

Supermicro

Product Name

X7DCL-3 Server Board

Product Type

Server Board

Front Panel Interfaces

1 x COM2

Number of SATA Interfaces

6

Form Factor

ATX

Additional Information

ROHS Compliant Dual Channel memory supported Chipset: Northbridge: Intel 5100 (San Clemente) Southbridge: Intel ICH9R BIOS Features: 8Mb Flash EEPROM with Phoenix BIOS Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 1.0/2.0 USB Keyboard support Hardware BIOS Virus protection SMBIOS 2.3 Hardware Monitoring: Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V Total of six 4-pin fans 6x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Support for 3-pins (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 6x Fan Connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI CPU / System Overheat LED Suspend-state Indicator LED Chassis intrusion detection Chassis intrusion header Chipkill Support Onboard voltage monitors for CPU core voltage, Memory voltage, +1.8V, +3.3V, +5V, +12V, 12V, +3.3V standby, +5V standby and VBAT) Fan status monitor with firmware control CPU/chassis temperature monitors Low noise fan speed control Platform Environment Control Interface (PECI) ready CPU fan auto-off in sleep mode Pulse Width Modulation (PWM) fan control I2C temperature sensing logic Thermal Monitor 2 (TM2) support CPU slow-down on temperature overheat CPU thermal trip support for processor protection Power-up mode control for recovery from AC power loss Chassis intrusion detection System resource alert via Supero Doctor III ACPI Features: Slow blinking LED for suspend state indicator Main switch override mechanism ACPI Power Management Power-on mode for power recovery Support CD Contents: Device drivers Software

Maximum Memory

32GB

Memory Technology

DDR2 SDRAM

Chipset Manufacturer

Intel

Total Processor Support

2

Processor Socket

Socket J

Front Side Bus

1066MHz

Graphics Controller Model

Z9s

IDE Controller

Yes

Floppy Controller

Yes

SATA Standard

Serial ATA/300

Gigabit Ethernet

Yes