Netgear's low-cost, stackable, Fast Ethernet switch delivers maximum throughput and flexibility where you need it to high-density workgroups at the edge of the network, or in the backbone of small networks. The ProSafe FSM7352S is a managed 48-port switch with auto-sensing 10/100 ports and four 10/100/1000 ports. This enables fiber connectivity through four hot-swappable Small Form-factor Pluggable (SFP) gigabit interfaces. The non-blocking design of the switch delivers simultaneous, full wire-speed, low-latency throughput to all ports. In addition, the 1U rack-mount form factor uses less rack space and provides a lower per-port cost than comparable Fast Ethernet switches. In desktop switching environments, wire-speed performance with full QoS control for all 10/100 interfaces is critical. The 4 Gigabit Ethernet combo interfaces provide unprecedented flexibility, whether you are stacking between switches, attaching bandwidth-thirsty file servers, or aggregating critical data to the core of your network.
Manufacturer:
Netgear, Inc
Manufacturer Part Number:
FSM7352SNA
Manufacturer Website Address:
www.netgear.com
Brand Name:
Netgear
Product Line:
ProSafe
Product Model:
FSM7352S
Product Name:
ProSafe FSM7352S 48-Port Managed Stackable Switch
Product Type:
Ethernet Switch
Number of Ports:
48
Fast Ethernet Port:
Yes
Interfaces/Ports:
4 x 10/100/1000Base-T
Connectivity Media:
Twisted Pair
Performance:
17.6Gbps
Manageable:
Yes
Management:
QoS SYSLOG Port Mirroring Support Telnet remote login (5 sessions) Command Line Interface (CLI) via console port Web-based management via embedded HTTP server Simple Network Management Protocol (SNMP v1, v2c, v3) Managment through ProSafe Network Management Software Layer 3 Services: VLAN routing Port-based routing VLANS: Number of VLANs: 512 (1-4096) Number of trunks: 6 Number of Queues: 8 Number of routes: 128
Protocols:
IGMP v1
Security Features:
802.1x Port Access Authentication Securable with Secured Shell (SSH v1.5, v2) Protected with Secured Sockets Layer (SSLv3) or Transport Layer Security (TLS v1)
Standard Memory:
128 MB
Flash Memory:
16 MB
Input Voltage:
110 V AC
Input Voltage Range:
100 V AC to 240 V AC
Frequency:
50 Hz or 60 Hz
Power Consumption:
80 W @ Maximum
Height:
1.7"
Width:
17.3"
Depth:
10.1"
Weight (Approximate):
7.05 lb
Package Contents:
FSM7352S Fast Ethernet Layer 3 Managed Switch Power cable Null modem cable Rack-mount kit Installation guide Warranty/Support Information card Resource CD-ROM with User Manual Rubber footpads for tabletop installation ProSafe Network Management Software (NMS100) 30-Day Trial CD-ROM
Additional Information:
Acoustic noise: (ANSI-S10.12) 56.07 dB Jumbo frame support: up to 9K packet size latency: Less than 80 microseconds for 64-byte frames 4 1000Base-T with optional SFP connectors fiber connection Full Layer 2 management suite + dynamic Layer 3 switching Front panel stacking delivers a single -IP manageable switch of up to 8 units
Certifications & Standards:
RFC 2998 DiffServ RFC 854-859 Telnet RFC 1213 MIB II RFC 951 BootP RFC 2865 RADIUs RFC 1493 Bridge MIB RFC 3046 DHCP Relay RFC 1215 SNMP Traps RFC 2030 SNTP (SNTP) RFC 1057, 2453 RIP v1, v2 RFC 1643 Ethernet Interface MIB RFC 2131, 2132 DHCP and BootP RFC 1757 RMON groups 1,2,3, and 9 RFC 1534 DHCP and BootP Interoperation RFC 1157, 1902, 1903, 1904, 1905, 1906, 1907 IEEE Standards: IEEE 802.1x IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3z 1000BASE-SX IEEE 802.3ab 1000BASE-T IEEE 802.3x Flow Control IEEE 802.1Q Static VLAN (Up to 4k) IEEE 802.1p CoS (CoS) IEEE 802.1D STP IEEE 802.1w RST IEEE 802.ls MSTP IEEE 802.3ad (LACP) Electromagnetic Emissions: CE mark, commercial FCC Part 15 Class A VCCI Class A EN 55022 (CISPR 22), Class A C-Tick Electromagnetic Immunity: EN 50082-1 EN 55024 Safety: CE mark, commercial CSA certified (CSA 22.2 #950) UL listed (UL 1950)/CUL IEC950/EN60950
Standard Warranty:
Lifetime