Netgear ProSafe FS752TS 48 Port 10/100 Stackable Smart Switch

Computer > Enterprise Computing > Network Switches

Availability: Out of Stock

Mfg Part# FS752TSNA

Please alert me when this product comes back in stock:
Email Address:

Product Information

Reviews

Pros / Cons

Recommended Accessories

NETGEAR's ProSafe FS752TS deliver performance and scalability through a 4Gbps, dual-ring, resilient stacking architecture with the ability to mix and match to stack up to six units or 192 10/100 ports and manage them all at a single IP address. The non-blocking design of the switches deliver simultaneous, full wire-speed, low-latency throughput to all ports. Shipped ready to go straight out of the box, they deliver switching that's easy to set up, stack-up and use.

General Information

Manufacturer:
Netgear, Inc
Manufacturer Part Number:
FS752TSNA
Manufacturer Website Address:
www.netgear.com
Brand Name:
Netgear
Product Line:
ProSafe
Product Model:
FS752TS
Product Name:
ProSafe FS752TS 48 Port 10/100 Stackable Smart Switch
Product Type:
Ethernet Switch

Interfaces/Ports

Number of Ports:
48
Fast Ethernet Port:
Yes
Interfaces/Ports:
48 x RJ-45 10/100Base-TX LAN

Media & Performance

Connectivity Media:
Category 5 Twisted Pair 10/100/1000Base-T
Performance:
17.6Gbps Bandwidth

I/O Expansions

Number of Expansion Slots:
2
Expansion Slots:
(2 Total) SFP

Network & Communication

Flow Control:
Back Pressure (Half-duplex)
Switching Method:
Store-and-forward
Layer Supported:
2
Number of Stacks:
6
Address Table:
8 K MAC Address - Per System

Management & Protocols

Manageable:
Yes
Management:
IEEE 802.1Q VLAN (128 groups, Static or Dynamic) IEEE 802.1p Class of Service (CoS) Port-based QoS SNMP v1, v2c, v3 MIB II Ethernet Interface MIB Bridge MIB DHCP client Storm control for broadcast, multicast and unknown unicast packets Port-based ingress/egress rate limiting SNTP RMON group 1, 2, 3, 9 Private Enterprise MIB Port Mirroring Support Web-based configuration Configuration Backup/Restore Password Access Control Firmware upgradeable
Protocols:
SNMPv3
Security Features:
Port-based security by locked MAC addresses 801.x security

Controls/Indicators

Status Indicators:
Unit: Power, Master, Stack ID Per Port: Link, Speed, Activity Per Gigabit Port: Link, Speed, Activity, Stack

Reliability

MTBF:
9.6 Year

Power Description

Input Voltage:
220 V AC
Input Voltage Range:
100 V AC to 240 V AC
Frequency:
50 Hz or 60 Hz
Power Consumption:
15 W @ Maximum

Environmental Conditions

Temperature:
32 F (0 C) to 122 F (50 C) Operating
Humidity:
90% Maximum Non-condensing Relative Humidity Operating
Altitude:
10000 ft Operating

Physical Characteristics

Height:
1.7"
Width:
17.8"
Depth:
8.1"
Weight (Approximate):
6.57 lb

Miscellaneous

Package Contents:
ProSafe 48 Port 10/100 Stackable Smart Switch Rubber footpads Power cord Rack-mount kit Resource CD Installation Guide Warranty/Support information card
Additional Information:
Network latency: Less than 20 microseconds for 64-byte frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission. Addressing: 48-bit MAC address
Certifications & Standards:
IEEE: IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3z IEEE 802.3x Electromagnetic Compliance: CE mark, commercial FCC Part 15 Class A VCCI Class A EN 55022 (CISPR 22) EN 55024 (CISPR 24) C-Tick Safety: CE mark, commercial CUL 60950 (Listed)/ EN60950 (Low Voltage Directive) RFC: RFC 1213 RFC 1643 RFC 1493 RFC 2131

Warranty