KENTROX, Kentrox T-SERV II T1 Channel Service Unit, 77115, Reviews

Warranty

Standard Warranty

5 Year

General Information

Manufacturer

Kentrox, LLC

Manufacturer Part Number

77115

Manufacturer Website Address

www.kentrox.com

Product Name

T-SERV II T1 Channel Service Unit

Marketing Information

The T-SERV II CSU is a proven, cost-effective Channel Service Unit (CSU) for terminating T1 and PRI circuits. Offering high reliability and exible con guration options. All basic CSU functions are contained in the T-SERV II CSU, including bipolar violation (BPV) correction, line build-out, loop-code generator for fault isolation, front-panel LED status indicators, test jacks, power options and automatic keep-alive signal generation. Its transparent operation passes the T1 bitstream unaltered.

Product Type

T1 CSU

Interfaces/Ports

Ports

1 x 15-pin DA-15 Terminal

Media & Performance

Data Transfer Rate

1.54Mbps Terminal

General Information

Manufacturer

Kentrox, LLC

Manufacturer Part Number

77115

Manufacturer Website Address

www.kentrox.com

Brand Name

Kentrox

Product Line

T-SERV II

Product Name

T-SERV II T1 Channel Service Unit

Marketing Information

The T-SERV II CSU is a proven, cost-effective Channel Service Unit (CSU) for terminating T1 and PRI circuits. Offering high reliability and exible con guration options. All basic CSU functions are contained in the T-SERV II CSU, including bipolar violation (BPV) correction, line build-out, loop-code generator for fault isolation, front-panel LED status indicators, test jacks, power options and automatic keep-alive signal generation. Its transparent operation passes the T1 bitstream unaltered.

Product Type

T1 CSU

Technical Information

Data Encoding

AMI/B8ZS/ZBTSI

Diagnostic Features

Loopbacks: Line loopback (network interface) Test loopback (network payload) Local loopback (terminal loop) Loop Codes: Generate and detect standard codes Set (10000) Reset (100) Alarm Relay: Contacts: Normally Open Activation: LOS, AIS, Keep Alive, Power Fail ACO (Alarm Cut Off): Front panel or control port

Power Description

Input Voltage

24 V DC to 48 V DC

Power Consumption

1.5 W

Environmental Conditions

Temperature

0 °C (32 °F) to 60 °C (140 °F) Operating

Humidity

0 to 95% Non-condensing Relative Humidity

Miscellaneous

Additional Information

Framing: Transparent (passes unframed/D4/SF/ESF) Input Signal: DSX-1 to -27 dB Output Signal: DSX-1 with LBO 0, -7.5, -15, or 22.5 dB (selectable) Signal Monitor: Low Pulse Density and Keep Alive 4-slot Shelf: 19" W x 3.5" H x 10.5" D 12-slot Shelf: 19" W x 6.75"" H x 10.5" D Jack Access: Toward Network: Bantam jacks In, Out and Monitor Toward Equipment: Bantam jacks In, Out and Monitor Density Monitor: Minimum Density: Per AT&T 62411 Maximum Zeros: Selectable 15, 47 or disable Keep Alive Timing: 80 consecutive Zeros Keep Alive Signal: Selectable SF framed/unframed, all-ones Power: Power Option: LINE/LOCAL selection Line Power: 57 to 150 ma 32 V drop @60 ma

Certifications & Standards

FCC compliance: Part 68 Reg. #F81-USA-17152-DE-N Part 15 Class A NRTL listed: ANSI/UL 60950-1-2002 DOC: CS-03 Reg. 1630 4311 A CSA: CAN/CSA C22.2 No. 60950-1-03 PUB 62411: T1 interface speci cations

Physical Characteristics

Form Factor

Plug-in Module