Manufacturer:

Hewlett-Packard

Manufacturer Part Number:

J8752A#ABA

Manufacturer Website Address:

www.hp.com

Brand Name:

HP

Product Line:

ProCurve

Product Series:

7000dl

Product Name:

ProCurve 7102dl Secure Router

Product Type:

Router

Number of Ports:

2

Fast Ethernet Port:

Yes

Interfaces/Ports:

1 x DB-9 Console Management

Connectivity Media:

Twisted Pair

Number of Expansion Slots:

4

Expansion Slots:

(1 Total) CompactFlash (CF) Card

Modules:

Not Included

Management:

Central Management: Supports SNMPv2 and can be centrally managed to archive and update configuration and software image files. Industry standard CLI VLAN support and tagging: supports 802.1Q (4,095 VLAN IDs) and 256 VLANs simultaneously ProCurve Manager

Protocols:

PPP

Standard Memory:

128MB

Memory Technology:

SDRAM

Flash Memory:

32 MB

Status Indicators:

LEDs: Power Fault Slot 1/Slot 2 - Stat Slot 1/Slot 2 - Bkp Slot 1/Slot 2 - Tx/ Rx ETH 0/1 - Link ETH 0/2 - Activity

Input Voltage:

110V AC

Input Voltage Range:

200V AC to 240V AC

Input Current:

0.2A

Frequency:

50 Hz or 60 Hz

Power Consumption:

15W Maximum

Power Source:

Power Supply

Temperature:

32 F (0.0 C) to 122 F (50.0 C) Operating

Humidity:

0% to 95% Relative Humidity Operating

Altitude:

3.05 km Maximum

Compatible Rack Unit:

1U

Form Factor:

Rack-mountable

Dimensions:

1.73" Height x 17.42" Width x 11.52" Depth

Weight:

10.26 lb

Package Contents:

ProCurve 7102dl Secure Router Racking hardware ProCurve SROS Documentation CD Installation Guide Quick Start Guide Software License, Warranty, and Support documentation Console cable Power cord

Additional Information:

Maximum VPN sessions: 500 WAN Throughput: Up to 4xT1/E1 lines Support H.323 Link Layer Discovery Protocol (LLDP): supported by ProCurve Manager to enables real-time mapping of Ethernet nodes connected to the router ports Dual flash images: Provides independent primary and secondary OS and configuration files for backup while upgrading. The file system also supports the storage of multiple configuration and image files. VoIP support: supports H.323 and SIP ALGs Layer 2/3/4 QoS Mechanisms: Supports IP Precedence and DiffServ priority tagging based on IP address, IP Type of Service (ToS), L3 protocol, TCP/UDP port number, and source port Scheduling Mechanisms: supports Weighed Fair Queuing (WFQ), FIFO, Low Latency Queuing (LLQ), and Priority Queuing (PQ) Policy and Shaping: supports Frame Relay Traffic Shaping (FRTS) and frame relay fragmentation (FRF.12) to minimize insertion delay across low speed WAN links Multilink capability: MLFR and MLPPP enable multiple T1/E1 ports to be aggregated and dynamically load balanced across Frame Relay or PPP links. Compact flash port: Facilitates remote site installation by allowing system image and configuration file to boot from externally accessible compact flash drive. Can be configured to support ProCurve "AutoSynch" (TM) technology to simultaneously update external CF and onboard flash with system image and configuration file to limit downtime and switchover in the event of failure.

Certifications & Standards:

Safety: cUL KN60950 TS60950 CE Labeled UL 60950 UL Listed AS/NZS60950 GOST R MEK60950 EN 60950/IEC 60950, 3rd edition CSA 22.2 No. 60950 3rd edition Emissions: CISPR22/A2:2002 EN55022/A2:2002 ICES-003 AS/NZS CISPR22:2002 VCCI V-3/2000.04 IEC/EN61000-3-2 IEC/EN61000-3-3 EN55024/A1:2001 BSMI CNS13438 IEC61000:4-2, 4-3, 4-4, 4-5, 4-6, 4-8, 4-11 FCC Rules Part 15, Subpart B Class A Telecom: TBR-1 TBR-2 TBR-3 TBR-12 TBR-13 TBR-21 ITU-T G.992.1 IEEE: IEEE 802.3 IEEE 802.3u IEEE 802.1X

Standard Warranty:

Lifetime