The single port Gigabit Ethernet Port Adapter (PA-GE) provides a Gigabit Ethernet connection for the Cisco 7200 series router. This port adapter (PA), which offers moderate performance, is suitable for campus, enterprise edge and wide-area network (WAN) aggregation applications. When used on the campus, the Cisco 7200 series router with the PA-GE connects the enterprise WAN to the Gigabit Ethernet campus backbone. At the enterprise edge, the PA-GE connects the WAN to the Gigabit Ethernet campus backbone. When the Cisco 7200 series router is used for WAN aggregation, the PA-GE provides intra-pop connectivity between the router and high-speed WAN core devices, such as the Cisco 12000 series router. The PA-GE may be inserted into any open port adapter slot on Cisco 7200VXR routers.
Connectivity Media:
Not Applicable
Data Transfer Rate:
1Gbps Full-duplex
Additional Information:
The PA-GE does not support half-duplex operation; it supports only full-duplex operationIEEE 802.3z Standards-CompliantSupports IEEE 802.1q frames (tagged or untagged mode)Ethernet Inter-Switch Link (ISL) encapsulationSupport for IP Quality of Service (QoS)/Class of Service (CoS), including CAR, ACL and MPLS/tag switchingPhysical: Single-port Interface Processor
Online Insertion and Removal (OIR):Supports OIR of adapter/interface and GBIC
System Requirements:
Minimum Cisco IOS Release Supported:12.0(6)T, 12.0(7)S, 12.1(1), 12.1(1)T, 12.1(1)E and after
Can be installed in port adapter slot 3 in Cisco 7120 series routers, and in port adapter slot 4 in Cisco 7140 series routersCan be installed in any available port adapter slot except port adapter slot 0, which is reserved for the I/O controller for the Fast Ethernet port (if present) on the Cisco 7200 VXR routersCan install a PA-GE port adapter in either slot 1 or slot 2 of a Cisco uBR7246 VXR
Compatibility:
Cisco 7100 Series RoutersCisco 7200 VXR RoutersCisco uBR7246 VXRCisco 7304 PCI Port Adapter Carrier Card
Certifications & Standards:
IEEE 802.1q
Standard Warranty:
90 Day Limited