Cisco's industry-standard Gigabit Interface Converter (GBIC) is a hot-swappable input/output device that plugs into a Gigabit Ethernet port/slot, linking the port with the fiber-optic network. GBICs can be used and interchanged on a wide variety of Cisco products and can be intermixed in combinations of IEEE 802.3z- compliant 1000BaseSX, 1000BaseLX/LH, or 1000BaseZX interfaces on a port-by-port basis. Furthermore, Cisco is offering a 1000BaseLX/LH interface that is fully compliant with the IEEE 802.3z 1000BaseLX standard, but has the ability to go up to 10 km over single-mode fiber, 5 km further than garden-variety 1000BaseLX interfaces. As additional capabilities are developed, these modules make it easy to upgrade to the latest interface technology, maximizing investment protection.
The WS-G5486, 1000BaseLX/LH interfaces fully comply with the IEEE 802.3z 1000BaseLX standard. However, their higher optical quality allows them to reach 10 km over single-mode fiber (SMF) versus the 5 km specified in the standard.
Manufacturer:
Cisco Systems, Inc
Manufacturer Part Number:
WS-G5486=
Manufacturer Website Address:
www.cisco.com
Brand Name:
Cisco
Product Name:
Long wavelength/long haul 1000Base-LX/LH GBIC
Product Type:
GBIC
Application/Usage:
Data Networking
Connectivity Media:
50 um Multi-mode Fiber
Distance Supported:
1804 ft 62.5 um Fiber
Data Transfer Rate:
1 Gbps Gigabit Ethernet
Expansion Slots:
Not Applicable
Daughter Cards:
Not Applicable
Additional Information:
GBIC Channel Insertion Loss: Transmitter output power (minimum/maximum): -3/-9.5 dBm Receiver maximum input power: -3 dBm Receiver sensitivity: -19 dBm 50 micron MMF: 4.4 dB 62.5 micron MMF: 6 dB 9 micron SMF: 6.5 dB
Contains a Class 1 laser of 1300 nm for 1000BASE-LX/LH (long-wavelength) applications.
Connector polishing: Super Physical Contact with a 20 micron radius
System Requirements:
Mode-conditioning patch cord (CAB-GELX-625 or equivalent) is required. Using an ordinary patch cord with MMF, 1000BASE-LX/LH GBICs, and a short link distance (10s of meters) can cause transceiver saturation resulting in an elevated bit error rate (BER). In addition, when using the Cisco 1000BASE-LX/LH GBIC with 62.5-micron diameter MMF, you must install a mode-conditioning patch cord between the GBIC and the MMF cable on both the transmit and receive ends of the link. The mode-conditioning patch cord is required for link distances greater than 984 feet (300 m).
Compatibility:
Catalyst 4000 Catalyst 5000 Catalyst 6000
Certifications & Standards:
IEEE 802.3z 1000BASE-LX standard
Regulatory and Standards Compliance: Safety - Laser Class I 21CFR1040
Standard Warranty:
90 Limited
Connector Cables
Add items to your shopping cart
Price: $137.99
Price: $48.99
Price: $56.99
Price: $47.99
Price: $47.99
Price: $110.99
