CISCO SYSTEMS, Cisco E1/T1 ISDN PRI Network Module, NM2CE1T1PRI, Reviews

General Information

Manufacturer

Cisco Systems, Inc

Manufacturer Part Number

NM-2CE1T1-PRI=

Manufacturer Website Address

www.cisco.com

Product Name

E1/T1 ISDN PRI Network Module

Marketing Information

The Cisco E1/T1 ISDN PRI Network Module's integrated channel service unit (CSU) provides direct connection to the Telecommunications network, thus allowing customers to consolidate customer premises equipment (CPE). This provides multifunction dial access aggregation, routing functionality, VPN and firewall security, and other capabilities right inside the router in power branch office environments. The 2-port version offer support for balanced and unbalanced E1 connectivity and conform easily to customers' specific applications.

Product Type

Network Module

Miscellaneous

Compatibility

Supported Platforms: 3745 3725 3660 Series 2691 2600XM Series

Warranty

Standard Warranty

90 Day Limited

Interfaces/Ports

Interfaces/Ports

2 x Channelized E1/T1/ISDN-PRI WAN

Interfaces/Ports Details

2 x RJ-48C Channelized E1/T1/ISDN-PRI WAN

Physical Characteristics

Dimensions

1.55" Height x 7.1" Width x 7.2" Depth

General Information

Manufacturer

Cisco Systems, Inc

Manufacturer Part Number

NM-2CE1T1-PRI=

Manufacturer Website Address

www.cisco.com

Brand Name

Cisco

Product Name

E1/T1 ISDN PRI Network Module

Marketing Information

The Cisco E1/T1 ISDN PRI Network Module's integrated channel service unit (CSU) provides direct connection to the Telecommunications network, thus allowing customers to consolidate customer premises equipment (CPE). This provides multifunction dial access aggregation, routing functionality, VPN and firewall security, and other capabilities right inside the router in power branch office environments. The 2-port version offer support for balanced and unbalanced E1 connectivity and conform easily to customers' specific applications.

Product Type

Network Module

Media & Performance

Data Transfer Rate

2.048Mbps E1

Management & Protocols

Management

Tx/Rx Mon bantam (tty) jacks for monitoring network activity (port selectable through Cisco IOS Command Line Interface (CLI)). Relevant Management Information Base (MIB) support: RFC1406-MIB CISCO-ICSUDSU-MIB Remote management: Supported by Cisco WAN Access Performance Management System (WAPMS) Cisco Intelligence Engine (IE2100) CiscoWorks

Miscellaneous

Additional Information

ISDN Concentration Dialup Remote Access Balanced (120-ohm) or Unbalanced (75-ohm) E1 termination in the same module Integrated CSU/DSU (channel service unit / data service unit) per port Full or fractional E1/T1 - can be fully channelized Supports PRI for data, T1-CAS, and E1-CAS R2 signaling E1 unframed and framed modes (G.703/G.704) available Interoperates with NM-xDM digital modem network modules Online insertion and removal (OIR) supported on Cisco 3660 and 3745 routers This module provides multifunction dial access aggregation, routing functionality, VPN and firewall security inside the Cisco router. Diagnostic Loopback Support: E1 loopback modes: Controller local loopback Interface local loopback T1 loopback modes: Interface local loopback Interface remote loopback Controller local loopback Controller remote loopback CSU loopback modes for T1 CSU: Data terminal equipment (DTE) loopback Network loopback Payload loopback V.54 Alarm detection: Yellow alarm: Receive/Send from/to network Blue alarm: Receive alarm indication signal (AIS) from network Red alarm: Loss of network signal Signaling debugging: CAS debugs ISDN Q.921 and Q.931 decode All other previously existing applicable Cisco IOS debugs Line coding: E1: HDB3 T1: B8ZS AMI Framing formats: E1: CRC4 T1: SF and ESF Output levels: E1: short-haul/long-haul T1 (LBO): - 0, -7.5, or -15 dB

System Requirements

Supported Platforms & Minimum IOS Versions: 3745 - 12.3(1) 3725 - 12.3(1) 3660 Series - 12.3(1) 2691 - 12.3(1) 2600XM Series - 12.3(1)

Compatibility

Supported Platforms: 3745 3725 3660 Series 2691 2600XM Series

Certifications & Standards

Regulatory compliance: FCC Part 68 TIA-968-A CS-03 Australia (S016, S038) JATE (T1) TBR4, 12, 13 (and NET5, ETS300156, ETS300 011) Telecommunication interface industry standards: CCITT / ITU G.703 CCITT / ITU G.704 CCITT / ITU G.706 CCITT / ITU I.431 CCITT / ITU G.823 ANSI T1.403 Safety: US (UL60950) Canada (C22.2 No.60950) Europe (EN60950) Australia/New Zealand (AS/NZS3260, TS001) Other Countries (IEC60950) NEBS: GR-63 GR-78 GR-1089-CORE Type 1/3 EMC Emissions/Immunity: EN 300 386 v1.3.1: 2001 AS/NZS3548: 1995 VCCI: V-3/2000.04 CNS13438: 1997 CFR47 Part 15: 2000 EN61000-6-1: 2001 CISPR22: 1997 [EN55022:1998] EN55024: 1998 EN50082-1: 1992 EN50082-1: 1997 EN61000-4-2: 1995 [incl AMD1 + AMD2] EN61000-4-3: 1996 [incl AMD 1 & 2] EN61000-4-4: 1995 EN61000-4-5: 1995 EN61000-4-6: 1996 [incl AMD1] Relevant Management Information Base (MIB): RFC1406 CISCO-ICSUDSU

Environmental Conditions

Temperature

-40 °F (-40 °C) to 185 °F (85 °C) Non-operating

Humidity

5% to 95% Non-condensing Relative Humidity

Physical Characteristics

Dimensions

1.55" Height x 7.1" Width x 7.2" Depth

Shipping Dimensions

4" Height x 8" Width x 15" Depth

Shipping Weight

1.54 lb