Manufacturer

Cisco Systems, Inc

Manufacturer Website Address

www.cisco.com

Marketing Information

The new Cisco Integrated V.92 analog modem network module provides cost-effective analog telephone service connectivity for lower-density remote-access service (RAS), dial-out and fax-out modem access, asynchronous dial-on-demand routing (DDR) plus dial backup, and remote router management. Combined with the differentiated services delivered through Cisco IOS Software, Cisco 2600 Series, 3660, and 3700 series routers offer customers best-in-class scalability, flexibility, and investment protection, all in cost-effective, multifunctional platforms.

Compatibility

Supported Platforms: 3745 3725 3660 series 2691 2600XM Series Major Modem Vendor Compatibility: Works with AT&T, Boca, Cisco, Hayes, Lucent, Motorola, Microcom, Multitech, USR, Xircom, and Zoom modems (compatibility with other modem vendors is fully expected, but not lab tested). Fax Vendor Compatibility: Compatible with Class 2 HP and Panasonic fax machines (compatibility with other fax vendors is fully expected, but not lab tested). Current Analog and Digital Modem Network Module Compatibility: Integrates with current integrated analog modem network modules, integrated V.90 modem WAN interface cards, and integrated digital modem network modules on supported platforms.

Interfaces/Ports

8 x Serial V.92

Dimensions

1.59" Height x 7.1" Width x 7.19" Depth

Manufacturer

Cisco Systems, Inc

Manufacturer Website Address

www.cisco.com

Product Name

Analog Modem Network Module

Product Type

Network Module

Management

CiscoWorks Telnet and console port command-line interface (CLI) configuration Modem Management Technology License (MMTL)

Security Features

RADIUS

System Requirements

Supported Platforms & Minimum IOS Versions: 3745 - 12.3(4)XD 3725 - 12.3(4)XD 3660 series - 12.3(4)XD 2691 - 12.3(4)XD 2600XM Series - 12.3(4)XD Memory and Software Requirements: The minimum software requirement for all supported platforms is Cisco IOS Software Release 12.3(4)XD. No additional memory is required to support a single Cisco Integrated V.92 Analog Modem Network Module (8-port) per chassis. Additional memory may be required as the number of modules per chassis increases or as additional features are enabled.

Certifications & Standards

Carrier Protocols: ITU V.90 ITU V.92 K56Flex ITU V.23 Bell 103 ITU V.21 ITU V.22 Bell 212A ITU V.22bis ITU V.32 ITU V.32bis ITU V.32 turbo ITU V.34 ITU V.34bis Error-correcting Link Access Protocols: ITU V.42 Link Access Procedure for Modems (LAPM), MNP 2-4 Compression Protocols: ITU-T V.44 ITU V.42bis (includes MNP-5) Fax Protocols: ITU-T V.27ter ITU-T V.29 ITU-T V.17 FAX Class 2 TIA/EIA-592 Class 2 and TIA/EIA-592 draft SP- 2388 Class 2 Group III fax transmission, at ITU-T V.33, V.17, V.29, V.27ter, and V.21 modulations NEBS Compliance: GR-63-Core GR-1089-Core NEBS Level 3 Type 1/3 Interface

Humidity

5% to 95% Non-condensing Relative Humidity Non-operating

Shipping Dimensions

3.25" Height x 10.15" Width x 15.75" Depth

Shipping Weight

1.89 lb

Interfaces/Ports

8 x Serial V.92

Status Indicators

Per Module: EN (Network module is enabled by Cisco IOS) Per Modem: IN USE (Indicates the modem is off-hook)