The new Cisco Integrated V.92 analog modem network module provides cost-effective analog telephone service connectivity for lower-density remote-access service (RAS), dial-out and fax-out modem access, asynchronous dial-on-demand routing (DDR) plus dial backup, and remote router management. Combined with the differentiated services delivered through Cisco IOS Software, Cisco 2600 Series, 3660, and 3700 series routers offer customers best-in-class scalability, flexibility, and investment protection, all in cost-effective, multifunctional platforms.
Manufacturer:
Cisco Systems, Inc
Manufacturer Part Number:
NM-16AM-V2=
Manufacturer Website Address:
www.cisco.com
Brand Name:
Cisco
Product Name:
Analog Modem Network Module
Product Type:
Network Module
Data Transfer Rate:
56Kbps Maximum Upstream
Additional Information:
Dialup Remote Access
Scalable analog modem dialup concentration for regions without digital connectivity
Centralized modem grouping for enterprise dial-out and fax-out services
On-demand dial backup for critical WAN links
Asynchronous dial-on-demand routing (DDR)
Connection speeds up to 56 Kbps (per ITU-T V.90 specification)
Modem Firmware Upgrade Capability:
Modem firmware is bundled with the Cisco IOS Software image, but can also be upgraded without reloading the router.
System Requirements:
Memory and Software Requirements:
The minimum software requirement for all supported platforms is Cisco IOS Software Release 12.3(4)XD.
No additional memory is required to support a single Cisco Integrated V.92 Analog Modem Network Module (16-port) per chassis. Additional memory may be required as the number of modules per chassis increases or as additional features are enabled.
Compatibility:
Supported Platforms:
3745
3725
3660 series
2691
2600XM Series
Major Modem Vendor Compatibility:
Works with AT&T, Boca, Cisco, Hayes, Lucent, Motorola, Microcom, Multitech, USR, Xircom, and Zoom modems (compatibility with other modem vendors is fully expected, but not lab tested).
Fax Vendor Compatibility:
Compatible with Class 2 HP and Panasonic fax machines (compatibility with other fax vendors is fully expected, but not lab tested).
Current Analog and Digital Modem Network Module Compatibility:
Integrates with current integrated analog modem network modules, integrated V.90 modem WAN interface cards, and integrated digital modem network modules on supported platforms.
Certifications & Standards:
Carrier Protocols:
ITU V.90
ITU V.92
K56Flex
ITU V.23
Bell 103
ITU V.21
ITU V.22
Bell 212A
ITU V.22bis
ITU V.32
ITU V.32bis
ITU V.32 turbo
ITU V.34
ITU V.34bis
Error-correcting Link Access Protocols:
ITU V.42 Link Access Procedure for Modems (LAPM), MNP 2-4
Compression Protocols:
ITU-T V.44
ITU V.42bis (includes MNP-5)
Fax Protocols:
ITU-T V.27ter
ITU-T V.29
ITU-T V.17
FAX Class 2
TIA/EIA-592 Class 2 and TIA/EIA-592 draft SP- 2388
Class 2 Group III fax transmission, at ITU-T V.33, V.17, V.29, V.27ter, and V.21 modulations
NEBS Compliance:
GR-63-Core
GR-1089-Core
NEBS Level 3
Type 1/3 Interface
Standard Warranty:
90 Day Limited