Manufacturer Part Number

AIR-PWRINJ-BLR2=

Marketing Information

The Power Injector LR2 converts the standard 10/100 BaseT Ethernet category 5 RJ-45 interface that is suitable for weather-protected areas to a dual F-Type connector interface for dual coaxial cables that are more suitable for harsh outdoor environments. While providing a 100baseT interface to the Cisco Aironet 1300 Series, the Power Injector LR2 also provides power to the unit over the same cables with a power discovery feature that protects other appliances from damage should they accidentally be connected. To support longer cable runs from your infrastructure network switch or router, the Power Injector LR is designed to accommodate up to a 100 meter coaxial cable run plus 100 meters of indoor cat5 cable, enabling total cable runs up to 200 meters. Lightning and surge protection is also included at the F-Type connector interface to provide added protection to your network infrastructure devices. The LR2 Power injector requires a Cisco supplied 48V DC source.

Dimensions

4.62" x 4.76" x 1.07"

Input Ports

2 x RJ-45 10/100Base-TX

Manufacturer

Cisco Systems, Inc

Manufacturer Website Address

www.cisco.com

Product Line

Aironet

Product Name

Aironet 1300 Access Point/Bridge Power Injector LR2

Product Type

POE Injector

Weight

2 lb

Temperature

-40 °F (-40 °C) to 185 °F (85 °C) Storage

Altitude

16000 ft Storage

Output Ports

2 x Type F Connector Ethernet