CISCO SYSTEMS, Cisco Advanced Integration Module, AIMATM1T1, Reviews

General Information

Manufacturer

Cisco Systems, Inc

Manufacturer Part Number

AIM-ATM-1T1=

Manufacturer Website Address

www.cisco.com

Product Name

Advanced Integration Module

Marketing Information

The AIM-ATM optimizes the Cisco 2600, 2600XM, 2691, 3660, and Cisco 3700 Series modular multiservice routers by offering ATM adaptation layer 2 (AAL2) and ATM adaptation layer 5 (AAL5) support for low-density T1/E1 data and voice connections over ATM networks. This AIM module allows service providers and enterprise customers to take advantage of the reliability and quality of service (QoS) available with ATM connectivity.

Product Type

Advanced Integration Module

Miscellaneous

Compatibility

Cisco 2610-2613 Cisco 2620 Cisco 2621 Cisco 2650 Cisco 2651 Cisco 2610XM Cisco 2611XM Cisco 2620XM Cisco 2621XM Cisco 2650XM Cisco 2651XM Cisco 2691 Cisco 3661 Cisco 3662 Cisco 3725 Cisco 3745

Warranty

Standard Warranty

90 Day Limited

Interfaces/Ports

Interfaces/Ports

1 x T1 WAN

Interfaces/Ports Details

1 x RJ-48 T1 WAN

Physical Characteristics

Dimensions

0.25" Height x 3.25" Width x 5.25" Depth

General Information

Manufacturer

Cisco Systems, Inc

Manufacturer Part Number

AIM-ATM-1T1=

Manufacturer Website Address

www.cisco.com

Brand Name

Cisco

Product Name

Advanced Integration Module

Marketing Information

The AIM-ATM optimizes the Cisco 2600, 2600XM, 2691, 3660, and Cisco 3700 Series modular multiservice routers by offering ATM adaptation layer 2 (AAL2) and ATM adaptation layer 5 (AAL5) support for low-density T1/E1 data and voice connections over ATM networks. This AIM module allows service providers and enterprise customers to take advantage of the reliability and quality of service (QoS) available with ATM connectivity.

Product Type

Advanced Integration Module

Media & Performance

Connectivity Media

Not Applicable

Data Transfer Rate

Not Applicable

Management & Protocols

Protocols

NHRP

Miscellaneous

Additional Information

Maximum number of ATM T1/E1s supported: Up to 4 ATM T1/E1's per AIM-ATM Required Cisco IOS Image: Any Cisco IOS "Plus" Feature Sets Item Included: High Performance ATM Advanced Integration Module (AIM-ATM) 1-Port RJ-48 Multiflex Trunk - T1 (VWIC-1MFT-T1) The AIM-ATM supports the following ATM services: Supports up to four ATM T1/E1 ports per AIM, using two 2-port multiflex T1/E1 VWICs in WIC slots, NM-xFE2W, NM-2W, or NM-HDV ATM class of service (CoS) features CBR, VBR-nrt, VBR-rt, ABR, and UBR AAL5: H.323 VoIP, up to four T1/E1 channels of AAL5 (with IMA support) VoATM-AAL2 (trunked only) Supports QoS features: Low-Latency Queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), per-virtual circuit queuing, pre-ATM VC shaping for non - real-time variable bit rate (VBR-nrt), Resource Reservation Protocol (RSVP), IP CoS map to ATM QoS services, CRTP (over Point-to-Point/Multilink over ATM) Permanent virtual circuit (PVC) and switched virtual circuits (SVC) support, where SVC is for data only ATM Forum UNI 3.0, UNI 3.1, and UNI 4.0 LAN Emulation 2.0 Client and Server Per VC queuing for segmentation Support for up to 1024 AAL5 VCs for data/voice features Support for up to1024 AAL2 VCs with up to 255 subchannels each for voice per AIM Network clock management support, which allows synchronization between the ATM network and PBX/Public Switched Telephone Network (PSTN) 1-Kbps resolution for sustained cell rate (SCR) and peak cell rate (PCR) 32-Kbps minimum traffic rate 13-bit range for VPI/VCI per interface Maximum Burst Size (MBS) is up to 255 cells per VC Dynamic management of the cell scheduler table Operations and management (OAM) support (F5) Early Packet Discard AAL5 reassembly time-outs AAL2 subcell multiplexing support RFC 1483 support for multiple encapsulations over ATM RFC 1577 support for routing over ATM Multiprotocol routing over ATM (MPOA) client and server IETF PPP over ATM Next Hop Resolution Protocol (NHRP) ILMI 4.0 IMA 1.1 Support

System Requirements

Minimum Cisco IOS Release required: Cisco 2600 Series, 3660: 12.2(2)XA/12.2.4T Cisco 2600XM Series: 12.2.8T1 Cisco 2691, 3700 Series: 12.2(11)YT and 12.2(13)T Hardware Prerequisites: Cisco 2600 and 2600XM: - Available AIM slot - VWIC-MFT for WAN, PSTN or PBX connections Cisco 3660: - MIX module and available AIM slots - VWIC-MFT in a NM-1FE1R2W, NM-1FE2W, NM-2FE2W, NM-2W, or NM-HDV Cisco 2691, 3700: - Available AIM slot - VWIC-MFT in a chassis WIC slot or in NM-1FE1R2W, NM-1FE2W, NM-2FE2W, NM-2W, or NM-HDV

Compatibility

Cisco 2610-2613 Cisco 2620 Cisco 2621 Cisco 2650 Cisco 2651 Cisco 2610XM Cisco 2611XM Cisco 2620XM Cisco 2621XM Cisco 2650XM Cisco 2651XM Cisco 2691 Cisco 3661 Cisco 3662 Cisco 3725 Cisco 3745

Certifications & Standards

Supports Industry Standards: Medium complexity Codec types of G.711 a-law, G.711 u-law, G.726-32K, G.726-24K, G.726-16K, G.729A, G.729AB are all supported High complexity Codec types of G.723.1 (all variations) G.728, G.729, G.729B and GSM-FR are supported ATM standards such as AAL2, AAL5, UNI 3.0, UNI 3.1, and UNI 4.0 are supported Safety: UL 60950 3rd Edition CAN/CSA C22.2 No. 60950-00 3rd Edition IEC 60950:1999, EN 60950:2000 AS/NZS 3260: 1993 with Amendments 1, 2, 3, and 4 TS001: 1996 with Amendment 1 EMI/EMC: Emissions: 47CFR15 Class A (FCC) CISPR22 Class A EN55022 Class A AS/NZS 3548 Class A (ACA) ICES003 Class A (Industry Canada) V-3 Class A (VCCI) CNS13438 Class A (BSMI) EN61000-3-2 EN61000-3-3 EN300386 Class A Immunity: EN50024 EN50082-1 EN61000-6-1 (including EN 61000 4-2 Electrostatic Discharge; EN 61000 4-3 Radiated Susceptibility; EN 61000 4-4 Electrical Fast Transients; EN 61000 4-5 Power & Signal Line Surges; EN 61000 4-6 Injected RF Swept Immunity; EN61000-4-11 Voltage Dips + Sags) EN300386 Post Telephone & Telegraph (PTT): This equipment complies with all the regulatory requirements for connection to the communications networks of each country in which it is sold

Environmental Conditions

Temperature

-4 °F (-20 °C) to 149 °F (65 °C) Storage

Humidity

10% to 85% Non-condensing Relative Humidity Storage

Physical Characteristics

Dimensions

0.25" Height x 3.25" Width x 5.25" Depth

Shipping Dimensions

2" Height x 9.25" Width x 12" Depth

Shipping Weight

1.25 lb