The Cisco 2811 provides significant additional value compared to prior generations of Cisco routers at similar price points by offering up to a fivefold performance improvement, up to a tenfold increase in security and voice performance, new embedded service options, and dramatically increased slot performance and density while maintaining support for most of the more than 90 existing modules that are available today for the Cisco 1700, Cisco 2600, and Cisco 3700 Series.
Manufacturer:
Cisco Systems, Inc
Manufacturer Part Number:
CISCO2811-AC-IP
Manufacturer Website Address:
www.cisco.com
Brand Name:
Cisco
Product Series:
2800
Product Name:
2811 Router with Inline Power
Product Type:
Integrated Services Router
Number of Ports:
2
Fast Ethernet Port:
Yes
Interfaces/Ports:
1 x Auxiliary Management
Standard Memory:
256MB
Maximum Memory:
760MB
Memory Technology:
DRAM
Flash Memory:
64 MB
Operating System:
Cisco 2800 IOS IP BASE
Input Voltage:
110V AC
Input Voltage Range:
100V AC to 240V AC
Input Current:
4A @ 110V AC
Frequency:
50 Hz or 60 Hz
Power Consumption:
160W Maximum
Package Contents:
2811 Router
Cisco 2800 IOS IP BASE
Device manager for routers (ROUTER-SDM)
256MB DDR DRAM Memory factory default for the Cisco 2800 (MEM2800-256D-INC)
64MB CF default for Cisco 2800 Series (MEM2800-64CF-INC)
Blank WAN Interface Card Panel (WIC-BLANK-PANEL)
Cisco 2800 and 3800 Series Blank network module panel (NM-28/38BLNK-PANEL)
Cisco 2811 AC/IP power supply (PWR-2811-AC-IP)
Power Cord, 110V (CAB-AC)
RJ-45-to-DB-9 console cable and RJ-45-to-DB-25 modem cable for management acces
One pair of rack-mount brackets with screws for 19-inch racks
Cisco product registration card
Cisco 2800 Series Regulatory Compliance and Safety Information document
Cisco Router and Security Device Manager (SDM) Quick Start Guide document
Cisco 2800 Series Integrated Services Routers Quick Start Guide
Additional Information:
With the Cisco IOS Software Advanced Security feature set, the Cisco 2811 provides a robust array of common security features such as a Cisco IOS Software Firewall, intrusion prevention, IPsec VPN, Secure Shell (SSH) Protocol Version 2.0, and Simple Network Management Protocol (SNMPv3) in one secure solution set
Cisco CME is an optional solution embedded in Cisco IOS Software that provides call processing for Cisco IP phones
Optional integrated power supply for distribution of Power over Ethernet (PoE)
AC-IP input surge current: 50A maximum, one cycle (-48V power included)
Power dissipation-AC without IP phone support: 170W (580 BTU/hr)
Power dissipation-AC with IP phone support-system only: 210W (717 BTU/hr)
Power dissipation-AC with IP phone support-IP phones: 160W (546 BTU/hr)
Interface Card Slots:
Each slot can support HWIC, WIC, VIC, or VWIC type modules
RPS:
External only, connector for RPS provided by default
Operation Altitude (derate 1.5 C per 1000 ft):
27.5 C @ 15 kft
35 C @ 3km/10 kft
40 C @ sea level
System Requirements:
Minimum Cisco IOS Software release: 12.3(8)T
Certifications & Standards:
IEEE 802.3: 10BASE-T
IEEE 802.3u: 100BASE-TX
IEEE 802.3af: Power-over-Ethernet
USB 1.1
Safety:
UL 60950
CAN/CSA C22.2 No. 60950
IEC 60950
EN 60950-1
AS/NZS 60950
Immunity:
EN300386
EN55024/CISPR24
EN50082-1
EN61000-6-2
EMC:
FCC Part 15
ICES-003 Class A
EN55022 Class A
CISPR22 Class A
AS/NZS 3548 Class A
VCCI Class A
EN 300386
EN61000-3-3
EN61000-3-2
TELCOM:
Interfaces comply with FCC Part 68, CS-03, JATE Technical Conditions, European Directive 99/5/EC and relevant TBR's
Standard Warranty:
90 Day Limited
Cable Adapters
Connector Cables
Modules
Panels
Power Cords
Power Supplies
Add items to your shopping cart
Price: $1478.99
Price: $1823.99
Price: $2434.99
Price: $6534.99
Price: $1697.99
Price: $7466.99
