The Cisco 2811 provides significant additional value compared to prior generations of Cisco routers at similar price points by offering up to a fivefold performance improvement, up to a tenfold increase in security and voice performance, new embedded service options, and dramatically increased slot performance and density while maintaining support for most of the more than 90 existing modules that are available today for the Cisco 1700, Cisco 2600, and Cisco 3700 Series.
Manufacturer:
Cisco Systems, Inc
Manufacturer Part Number:
CISCO2811-ADSL/K9
Manufacturer Website Address:
www.cisco.com
Brand Name:
Cisco
Product Series:
2800
Product Model:
2811
Product Name:
2811 Router with ADSL over POTS Bundle
Product Type:
Multi Service Router
Number of Ports:
2
Fast Ethernet Port:
Yes
Interfaces/Ports:
2 x USB
Management:
Cisco Router and Security Device Manager (SDM) Command-Line Interface (CLI) CiscoWorks Cisco AutoInstall Simple Network Management Protocol (SNMP) Cisco Call Manager Express (CME)
Protocols:
SNMPv3
Security Features:
Multiprotocol Label Switching (MPLS) VPN support Secure Shell (SSH) VPN Hardware Acceleration (on motherboard): DES, 3DES, AES 128, AES 192, and AES 256
Standard Memory:
256 MB
Maximum Memory:
760 MB
Memory Technology:
DRAM
Flash Memory:
64 MB
Input Voltage:
110 V AC
Input Voltage Range:
100 V AC to 240 V AC
Input Current:
1 A @ 230 V AC
Frequency:
50 Hz or 60 Hz
Compatible Rack Unit:
1U
Form Factor:
Wall Mountable
Height:
1.8"
Width:
17.3"
Depth:
16.4"
Package Contents:
2811 Router Cisco 2800 IOS SP SERVICES Device manager for routers (ROUTER-SDM) 256MB DDR DRAM Memory factory default for the Cisco 2800 (MEM2800-256D-INC) 64MB CF default for Cisco 2800 Series (MEM2800-64CF-INC) 1-port ADSL WAN Interface Card (WIC-1ADSL) Blank WAN Interface Card Panel (WIC-BLANK-PANEL) Cisco 2800 and 3800 Series Blank network module panel (NM-28/38BLNK-PANEL) Cisco 2811 AC power supply (PWR-2811-AC) Power Cord, 110V (CAB-AC) RJ-45-to-DB-9 console cable and RJ-45-to-DB-25 modem cable for management access One pair of rack-mount brackets with screws for 19-inch racks Cisco Product Registration Card Cisco 2800 Series Regulatory Compliance and Safety Information document Cisco Router and Security Device Manager (SDM) Quick Start Guide document Cisco 2800 Series Integrated Services Routers Quick Start Guide
Additional Information:
Interface Card Slots: Each slot can support HWIC, WIC, VIC, or VWIC type modules RPS: External only, connector for RPS provided by default ADSL over POTS WAN Interface Card: Supports ADSL over POTS with Annex A ITU 992.1 (G.dmt) Supports ATM AAL5 Supports ATM Class of Service features CBR, VBR-nrt, VBR-rt, UBR Supports IP QoS Supports up to 23 virtual circuits on WIC Interoperates with third party and Cisco DSLAMs Cisco Call Manager Express (CME): Cisco CME is an optional solution embedded in Cisco IOS Software that provides call processing for Cisco IP phones Operation Altitude (derate 1.5 C per 1000 ft): 27.5 C @ 15 kft 35 C @ 3km/10 kft 40 C @ sea level
System Requirements:
Minimum Cisco IOS Software release: 12.3(8)T
Certifications & Standards:
IEEE 802.3: 10BASE-T IEEE 802.3u: 100BASE-TX ADSL over POTS WIC: Complies with ANSI T1.413 issue 2 USB 1.1 Safety: UL 60950 CAN/CSA C22.2 No. 60950 IEC 60950 EN 60950-1 AS/NZS 60950 Immunity: EN300386 EN55024/CISPR24 EN50082-1 EN61000-6-2 EMC: FCC Part 15 ICES-003 Class A EN55022 Class A CISPR22 Class A AS/NZS 3548 Class A VCCI Class A EN 300386 EN61000-3-3 EN61000-3-2 TELCOM: Interfaces comply with FCC Part 68, CS-03, JATE Technical Conditions, European Directive 99/5/EC and relevant TBR's
Standard Warranty:
90 Day Limited
Connector Cables
Modules
Power Cords
Add items to your shopping cart
Price: $1789.99
Price: $2406.99
Price: $20.99
Price: $1298.99
Price: $56.99
Price: $1054.99
