Chief Manufacturing

RPA181

www.chiefmfg.com

Chief

RPA

RPA181

RPA181 Custom Inverted LCD/DLP Projector Ceiling Mount

Ceiling Mount

50 lb Maximum -

Black

Steel

1.75" Height x 6.25" Width x 5.5" Depth

RPA181 Custom Inverted LCD/DLP Projector Ceiling Mount Includes: 1 x Bracket, Ceiling 1 x Bracket, Joint 1 x Plate, Adjustment 12 x Screw, Self-Tapping, Pan Head, (10-24 x 1/2"), with washer 1 x Screw, Set, 5/16" Allen Wrench Security Allen Wrench 1 x SLB-180 Bracket 1 x (M4 - 6mm) Philips Pan Screws 3 x (10 - 24) Thumb Nuts 2 x (M4 - 8mm) Philips Pan Screws 3 x M4 Flat washer

Column: 1.5" NPT Three ceiling mounting methods Flush mount without disassembly Convenient lamp and filter access Allows natural convection ventilation Roll Adjustment: +/-4 degrees adjustment up or down Compatible with the PG-1 Projector Guard Security Cage Allows lateral shift by adding the LSB-100 Lateral Shift Accessory Pitch Adjustment: +/- 25 degrees adjustment on each side of the mount Allows cables to be routed through the top of the mount without additional accessories Compatible with a large assortment of accessories to easily overcome a variety of installation challenges Yaw Adjustment: 360 degrees by turning the mount on the threaded column and securing in place with set screw. 12 degrees yaw possible on flush mount using slots in top of RPA

Plus Projectors: U3-810SF U3-810W U3-810Z U3-810ZW U3-1100SF U3-1100W U3-1100Z U3-1100ZW

UL