Standard Warranty

Lifetime

Manufacturer Part Number

AT-MC101XL-10

Product Name

AT-MC101XL Media Converter

Product Type

Media Converter

Interfaces/Ports

1 x ST

Weight

0.65lb

Manufacturer

Allied Telesis, Inc

Manufacturer Website Address

www.alliedtelesyn.com

Product Series

AT-MC100

Marketing Information

The media converter features an internal MDI/MDIX switch, allowing the converter to be connected to either a PC, hub or switch with a simple UTP cable. The media converter also allows the installer to test the integrity of fiber connection, by forcing the converter to communicate over the fiber cable. This 'Link Test' feature allows installers to check for cable faults without the need for expensive fiberoptic test equipment.

Connectivity

Fiber

Distance Support

1.24Mile

Input Voltage

12 V DC 5%

Temperature

32 °F (0 °C) to 104 °F (40 °C) Operating

Altitude

0 ft to 10000 ft Operating

Dimensions

1" Height x 4.12" Width x 3.75" Depth

Weight

0.65lb

Additional Information

Half and Full Duplex operation Transparent to 802.1Q packets Fits the AT-MCR12 rackmount chassis MDI/MDIX MissingLink Link Test External Power Supply: 100-240vAC, 50/60Hz +/- 3% PACKET TRANSMISSION CHARACTERISTICS: Round Trip Delay: 0.4µs Maximum Bit Error Rate (BER): < 10 -12 TWISTED PAIR INTERFACE: UTP Differential Output Voltage: - Typical: 980mv - Min: 950mv - Max: 1050mv Overshoot Voltage: - Typical: 4% - Max: 5% Single Amplitude Symmetry: - Typical: 1.0062 - Min: 0.98 - Max: 1.02 Rise and Fall Time: - Rise: - Typical: 4.6ns - Min: 3.0ns - Max: 5.0ns - Fall: - Typical: 4.2ns - Min: 3.0ns - Max: 5.0ns Rise and Fall Time Symmetry: - Typical: 0.4ns - Max: 0.5ns Port Type (Connector): 100FX MMF: - Launch Power (dBm): - Max: -14.0 - Avg: -16.8 - Min: -19.0 - Receive Power (dBm): - Min. Sensitivity: -31.8 - Typical Sensitivity: -34.5 - Saturation: -14.0

Standard Warranty

Lifetime

Interfaces/Ports

1 x ST

Network Technology

100Base-FX