Adtran TSU ACE T1/Fractional T1 CSU/DSU

Adtran

1202295L1

www.adtran.com

Adtran

TSU ACE T1/Fractional T1 CSU/DSU

T1 CSU/DSU

AMI/B8ZS

Local: Payload/Line Loopback, DTE Loopback Remote: Payload/Line Loopback, V.54 (DTE) Loopback Network: CSU and DSU loopbacks

1 x 34-pin Serial V.35 Mechanical

CCITT V.35

1.54 Mbps Network

115 V AC

60 Hz

5 W

-4 F (-20 C) to 158 F (70 C) Storage

Up to 95% Non-condensing Relative Humidity

Wall Mountable

1.5" Height x 9.0" Width x 6.3" Depth

2.00 lb

Auto and Manual D4(SF) or ESF framing support Easy to use front panel keypad for unit configuration Remote configuration from host TSU via FDL or 8k in-band Local and remote loopback capability Extensive built in test capabilities IEC standard power connection DTE Transmit Clock: Automatic Performance Monitor & Data: BPVs/CRCs, ES, SES, UAS, % AS, % EFSEC, Alarms, Errors Reports: NI information stored for last 24 hours in 15 minute increments PRMS: ANSI Performance Report Messages (User selectable) Framing: - SF/ESF - Auto Detection ESF Format: - AT&T 54016 - ANSI T1.403 DSO Assignment: - Contiguous - Alternating T1 Transmit Timing: - Network Loop Timed - Internal - DTE Built-In Test Patterns: - 511 (active DS0s) with error insert available - 1:8 (all DS0s) - All 1's (all DS0s) - All 0's (all DS0s)

Remote Configuration: - Required Software: - ADTRAN T-Watch Pro - Required Hardware (one of the following) - TSU LT (1203060L1) - TSU (1200060L2) - TSU RM (1202077L1) - TSU ESP (1200169L1)

FCC part 15 Class A FCC Part 68 Industry Canada CS03 UL CUL

5 Year - North American