The ADTRAN T3SU 300 is a cost-effective multiport T3 DSU/CSU capable of providing users up to four DTE data ports for broadband connectivity over unchannelized T3 networks. This multiport DSU/CSU allows users to share the cost of a T3 line between multiple applications. The affordable T3SU 300 is one of many broadband access products from ADTRAN.
Diagnostic Features:
DS3 Network:
- ANSI T1.107 compatible loopbacks
- Line, payload and line w/bert loopbacks
DTE Ports:
- Network, network w/bert loopbacks
- Local DTE, local DTE w/bert loopbacks
- Remote DTE, remote DTE w/bert loopbacks
- HSSI only: DTE device loopback
DSX-1 ports: Local/remote payload
Input Voltage:
120 V AC
Power Consumption:
9 W
Package Contents:
One 8-pin to 8-pin modular cable Modular-to-female DB9 adapter User Manual
Additional Information:
T3SU 300 Interface:
- Network Interface:
- Clear channel, non-channelized DS3
- Line build out: short (0 to 50 feet) and long (50 to 450 feet)
- Framing format: M13 and C-bit parity
- Line interface: 75-ohm BNC coax female connectors
- DTE Interface(s):
- Single integrated HSSI port, SCSI-II 50-pin female
- Three (3) option slots accept any combination of: HSSI Port, SCSI-II 50-pin female; High-speed V.35 port, M34 female
- All option cards are hot swappable
- LAN Interface(s):
- Supports up to 3 Quad (4-port) Bridge modules
- Module provides four auto-sensing 10/100 BaseT Ethernet ports
- Acts as a bridge for data transport over the WAN
- Provides Ethernet switching between each of the LAN ports
- DSX-1 Interface:
- Supports up to 3 Quad DSX modules
- ANSI T1.403, AT&T TR 62411
- SF/ESF AMI/B8ZS
- Auto line build-out for 0-655 ft
- VT 100 Terminal Interface:
- RJ48, EIA-232 compatible, female DB9 adapter provided
- Inband remote configuration and statistics
DTE Rates Supported:
- Bandwidth selectable in 75 Kbps increments
Clocking:
- Loop (slaved to network receive clock)
- Local (private network master)
Performance Monitoring:
- Local and Remote Network Port Statistics:
- Current 15-minute, 24-hour (96 15-minute intervals) and total for 24 hours
- P-bit errored & severely errored seconds
- Severely errored framing seconds
- Line, P-bit, C-bit coding violations
- Line errored, unavailable seconds
- C-bit errored & severely errored seconds
- DTE Ports: Inactive based on loss of DTR and/or RTS
- Integrated 10BaseT Ethernet and SLIP/PPP (async) port
- MIB II, RFC 1213 & 1407 compliant
- ADTRAN Enterprise MIB for extended monitoring and DSU control/configuration
Certifications & Standards:
FCC Part 15 Class A UL and CUL