The ATLAS 550 is an Integrated Access Device (IAD) designed to improve and lower the costs of voice/data, video, and Internet communications for enterprise businesses and network service providers. With the ATLAS 550, many WAN functions have been combined into a small, economical, modular platform that will replace a rack of traditional single-function access devices. With the ATLAS 550, traditional multiplexed and packet networks are easier to deploy and manage, while providing more bandwidth efficiency out of new or existing communications links. The ATLAS 550 provides a new level of communication flexibility by offering many of the features previously found in larger central office, PBX, or router equipment.
The ATLAS 550 chassis includes a high-speed multi-protocol backplane and six modular expansion slots: two network interface slots and four user interfaces slots. A wide range of hot swappable, industry standard modules are also available to effectively converge telecommunications and existing network systems such as routers, PBX, key systems, video conferencing equipment, remote access servers, LANs, faxes, and telephones. The ATLAS 550 typically resides at the customer site and performs the functionsfound in multi-port multiplexers, channel banks, 1/0 cross connect switches, Frame Relay Access Devices/concentrators/switches, IP routers, and ISDN switches. It also includes an integral voice switchboard and dial plan for dynamically and intelligently switching voice and data calls based on the telephone number dialed.
Number of Ports:
2
Fast Ethernet Port:
Yes
T-Carrier Port:
Yes
Interfaces/Ports:
1 x Serial Management
Connectivity Media:
Twisted Pair
Management:
SNMP, MIB II (RFC1213), DS-1 MIB (RFC1406) and Enterprise MIBs Trap/Alarm messages using SNMP Configuration, Alarms, Statistics, and Tests via Telnet N-Form software provides front/rear panel images, trap/alarm messages, and customizable reports Supports local and remote loopbacks, QRSS test patterns Alarm contacts
Protocols:
OSPF
Status Indicators:
LEDs for complete operational status indications, front and rear VT100 craft interfaces for terminal or dial-in access, alarm contacts, and a 10/100BaseT Ethernet LAN connection for SNMP and Telnet.
Input Voltage Range:
-48 V DC
Power Consumption:
10 W to 60 W
Power Source:
Power Supply
Height:
3.5"
Width:
17.1"
Depth:
11.7"
Weight (Approximate):
10.14 lb
Package Contents:
ATLAS 550 Enterprise Integrated Access Device T1/PRI Network Interface Module Frame Relay Software ATLAS System CD (Includes ADTRAN Utilities TFTP Server, VT100 Client, Telnet; System Manual; System MIBS; Application Notes; Module Quick Start Guides; ADOBE Acrobat Reader) one 15 ft RJ-48C straightthrough cable one RJ-48 to DB-9 adapter one RJ-48 to DB-25 adapter one 6 ft straight cable
Additional Information:
Supports TDM or packet networks Provides multiplexing, 1/0 DACS/cross-connect, Frame Relay PPP, IP routing, ISDN switching, and intelligent voice/data call routing All Modules Hot Swappable Integral Frame Relay software for access, concentration, and switching Supports up to 32 analog ports Optional Voice Compression Module for Voice over Frame Relay (VoFR) The ATLAS 550 supports video applications by providing multiple E1, T1, PRI, BRI, V.35, RS-449, and EIA-530 interfaces for CODECs and gateways. By using the Nx56/64 Bonding module, video calls ranging from 112 Kbps up to a full E1 PRA rate (1920 Kbps) can be supported. Connects with network or user equipment under software control Built-in CSU T1/PRI Framing: D4(SF)/ESF T1/PRI Line Code: AMI/B8ZS T1/PRI Input Signal: 0 to -36 dB FECN/BECN, Discard Eligible (DE) User configurable DLCI priorities G.723.1 voice compression (with optional module) ANSI T1.617-D (Annex D) ITU-T Q.933-A (Annex A) LMI (Group of four) Automatic link management protocol discovery TX/RX packets, state changes, signaling errors, TX/RX full status, TX/RX link integrity status, FECN/BECN count, DE count Min/Max/Avg delay, dropped packets 992 PVCs per system
Certifications & Standards:
RFC 1490 RFC1213 RFC1406 UL 1950 Agency Approvals: UL EN60950, CUL FCC Part 15 (Class A) FCC Part 68
Standard Warranty:
5 Year Limited
Modules
Add items to your shopping cart